Chemical Resistant Coatings Products: Is Your Floor Chemical Safe?

Those who seek chemical resistant coatings products are often faced with a plethora of very bewildering merchandise, especially if they rely on what can be found on the Internet. It would appear too, that many of those found cannot truly stand behind their products with actual scientific facts. Unfortunately they do not possess the industry proven techniques that Silikal does.

Of course those who seek some kind of chemical resistant coatings products do so because they are tired of having to defray the very expensive costs of not only premature repairs to their floors, but even having to totally need to seek total replacements for their flooring. Granted, some businesses utilize some amazingly harmful cleaning solvents and oils, even acids. These then totally erode most floors, but not when Silikal is utilized on floors that call for chemical resistant coatings products.

You see, Silikal offers a flooring solution that is proven to offer the more than adequate resistance to any chemicals currently in use. This is why Silikal is used in laboratories, and wherever chemicals are utilized.

The reasons are myriad, however generally Silikal is best in that kind of environment because it totally creates a liquid as well as a vapor moisture barrier, due to its higher coating thickness. In addition, you will find that Silikal chemical resistant coatings products are chemically inert, and that is why they offer such corrosion resistance.

There are times when a chemical is accidentally spilled and thus a cleanup is hastily required. The uniformity and consistency of the Silikal flooring enables any cleanup to be hastily and easily accomplished. This kind of flooring also enables you to have high impact strength as well as excellent abrasion resistance in your flooring as well. Of course, this also leads to having an outstanding life expansion of the flooring solution too!

A very good example where Silikal flooring outshines other products is in its use in hangars. You will find that many other so called high performance flooring simply cannot last in a hangar. That’s because there are absolutely no more punishing chemicals than those chemicals used in aviation. Jet fuels alone are known to simply erode any floor almost immediately. Thus, no matter what you need to protect your floors from, be it jet fuels or any kind of chemical, check with your Silikal flooring specialists to find the right answer to your chemical resistant coatings products solution. After all, Silikal goes so much further than any high solvent coating because it is Silikal.

Hangar Floor Coating Specifications & Requirements

Aircraft maintenance hangers are one of the most difficult to find good flooring for due to the many hangar floor coating specifications. Arguments arise as to whether light coatings of greater than 16 mills, where one mil is equal to 0.001” or thicker film coatings of greater than 250 mils is correct. Then too, some quality control people prefer an overcoating sound coating system.

Whichever method is utilized, there is at least complete agreement to the following: the hangar floor coating specifications absolutely must tolerate any high moisture vapor emanation rates, must produce a suitably level surface when it is laid over coarse concrete, must have a very high impact resistance, and most also agree that it should be a proper topcoat base for at least 10 years of service.

The chemical resistance of most topcoats requires that during the initial curing of said hangar floors, meaning the first two weeks of service, any chemical spills and even any drips need to be straightaway removed from the floor surfaces. Cardboard or plastic sheets need to be placed under each tire of the aircraft, as those tires may have become warm enough to create tire imprints on the new topcoat and permanently mark it. Further hangar floor coating specifications require that only light scrubbing or mopping be allowed for cleaning. No organic solvents, abrasive particle cleansers, high pH alkali cleansers, or detergents that may contain bleach or low pH acids may be used on such flooring.

If you have read the above so far, how would you like to simply throw those entire hangar floor coating specifications out the window? If instead of the other kinds of flooring possibilities you utilize Silikal in its place you may do that very thing with complete impunity.

The Silikal aircraft hangar floor coating will provide the high performance being sought, for the Silikal flooring will resist all those grueling aviation chemicals as well as jet fuels within one hour following installation. Then too, Silikal aircraft hangar floor coatings will also enhance the light reflectivity of the hangar without succumbing to UV fading, and that is important for both workplace efficiency as well as safety. In addition, the floor will be very stress-free to clean, which saves both time and money. Hangar owners as well as contractors believed that only high solvent resisting coatings had to be used for aircraft hangar floor coatings, but now the greater majority has learned about the high performance product called Silikal which is a low solvent content flooring.

Thanks to Silikal, hangar floors are now left with flooring that will hold up to the heavy loads as well as the mechanical abrasion found in hangars. Those hangar floors that utilized the Silikal competitors in the past have unsightly and uneven floors. Only Silikal floors are perfectly even and last for years and years – so long in fact we have yet to determine just how long as Silikal floors installed decades ago are still shining like new!

A Slip Resistant Tile Porcelain Sealant

If ever you have slipped on tiled flooring, you know why it’s important to have slip resistant tile porcelain. Now, you should know that there is such a thing as skid resistance scaling for floors. This is important if you are seeking slip resistant tile porcelain. The Ceramic Tile Institute has put it out, so you know for sure that it can be totally relied upon.

What you will find terribly interesting about this particular skid resistance scale is that they take into consideration a number of premises. For example they carefully look at the differences in the tile, whether it has bumps or is polished, as polished shiny tile is obviously much more slippery. They then look at the speed of the subject. This too is quite important, as a young teenager running to get to his phone can put on a startling amount of speed, as you may already be aware of. They even look at the force required to move that particular subject, and most importantly if the tile is going to be wet or dry. That alone can change the entire story, as you can imagine. Finally they even study the angle of the tile. Of course any tile will be much more slippery if on an angle rather than flat, just as snow skiing has to be done on quite an angle to get the true slippery feeling under your skis.

Some interesting asides here regarding slip resistant tile porcelain is the fact that those highly polished shiny tiles are definitely counter indicative if you have small children or the elderly who will be walking upon that tile. This is why hotel and high rise building flooring shy away from the extra polished tiles. Another aside is that the greater the tile has an anti-slip finish on it, the harder it will be to keep scrupulously clean, which is highly important in commercial bathrooms, dressing rooms, gyms and locker rooms of all kinds.

Those who are mathematically inclined will like that the way they work the slip resistance of tile, wet or dry, is to utilize the coefficient of friction. What they are seeking to accomplish is to try to meet or exceed the general safety and health needs, comprising of the American with Disabilities Act (ADA) as well as the Occupational Safety and Health Administration (OSHA) requirements.

Interestingly enough even the shiniest, most beautifully polished tile can be rendered non-slip by the application of clear Silikal. Thus, as the saying goes, you can have your cake and eat it too! What happens is that the Silikal clear coat is simply applied over the existing tile, and there it bonds so that no liquids will ever enter it. Silikal, you see, is totally impermeable and throughout the life of the Silikal application it will remain pinhole free. Silikal will rein in your now slip resistant tile porcelain so that it becomes totally slip free while retaining the aesthetic beauty of that gorgeous tile porcelain!

Resinous Flooring Specifications & The Need for An Enduring Top Coat

When you are in search of various resinous flooring specifications, you will find that ultimately one product is as good as another. Over and over again you will be faced with two very long words, so long that they will be abbreviated, and those words are Methyl Methacrylate or MMA as abbreviated and mostly known as because it is such a mouthful to pronounce.

Delving even further in resinous flooring specifications, you may make a very interesting and effectively highly meritorious discovery. Silikal does not use MMA in their resinous flooring specifications!

That is because Silikal utilizes “enhanced” MMA instead. Their researchers and scientists have found that to make a miracle product such as MMA was thought to be, into an even better product by enhancing it with a highly secretive ingredient made it completely unique.

Going one step further, you may run into businesses that badly need seamless resinous flooring specifications which have resorted to tile instead. That’s because they were led to believe that tile could be hermetically sealed against any intrusion. Unfortunately that is not so at all.

Tile, it should be clearly understood, is anything but seamless, and therefore it will actually invite microbes to infiltrate underneath and in between tiles. Once there, fungus and even staph will grow under and within its grout. What happens next is the stuff that B grade movies are made of, for usually one sees the grout itself actually begin to disintegrate as various “things” begin to live there such as bacteria, and as mentioned, even staph! All of this and more will happen since tile and grout are definitely not seamless.

Many of other types of resinous flooring specifications disregard long term wear and tear, whereas Silikal does not. Places such as department stores, for example have so much high volume foot traffic that the store must always repair its flooring, lest it become a hazard to both its employees as well as to their customers. You may be assured that being in such a position is not considered good business.

Then too perhaps your business is one that creates the floor to suffer tremendous amounts of corrosion, such as a pool chemical company There too Silikal will be your winner, for it never suffers from any kind of chemical corrosion.

Thus, just remember that all different types of MMA flooring needs to be replaced every so often, it is only Silikal that is proud to state that once applied, it will never have to be repeated again, in the floor’s lifetime. Only Silikal can make that promise!