Sanitary Floor Drain Design: Old Practice Is Best Practice

Sanitary Floor Drain Design & Keeping Surfaces Safe

If your business entails any liquids chances are that you are seeking the very best sanitary floor drain design. In addition, you are going to wish for the flooring to go by way of a sanitary flooring as well. However, prior to getting to the flooring a bit of instruction will help you understand the terms utilized.

For instance when speaking of an indirect waste pipe, it means some sort of pipe that is not connected in a direct manner to your waste system. In other words the waste liquid discharges into some kind of plumbing fixture such as a floor sink, or an indirect waste receptor. Both of these are done so that there exists an air gap in order to prevent contamination of foods. Keep in mind that such a receptor must have a corrosion resistant and easy to clean smooth interior surface. Flooring must also be easy to clean and smooth to go with the above.

The cleanest and safest floor available is Silikal which obviously goes well with an indirect waste pipe or actually any sanitary floor drain design. You see Silikal is installed in such a way that the water has but one place to go, and that is down the drain. It will not seep under the flooring where it can putrefy and cause vermin or at least mildew and other unwanted growths.

Now if you are seeking a sanitary floor drain design, then that means that you are in business. Being in business you will greatly appreciate the fact that when you use the Silikal product for your flooring, you will not need to shut down business operations for a couple of day, a weekend, or even 3-4 hours, for all it takes Silikal to cure or harden, is but one hour.

Additionally, Silikal is completely safe to utilize around food, as it is 100% completely free of any VOCs, which are Volatile Organic Compounds. Be careful if you are told that such and such a product has low VOCS. Just how low must such VOCs be for you to trust them? Please ascertain that your floors receive a no VOC product only with Silikal.

Wherever a sanitary floor drain design is needed means that water will be involved, and water and floors means slips and falls. Thus you will be more than relieved that Silikal is a product that is utilized in the slipperiest of wet conditions, such as on boat & vessel hulls that go out to sea.

And since Silikal flooring is totally non-porous, your cleaning staff will be inordinately pleased with having to clean a Silikal floor. Now, do not share this with your cleaning staff, but Silikal floors are the easiest in the world to keep clean.

Cement Coating Products: Where to Begin?

Cement Coating Products & The Options They Offer

If you are searching for cement coating products, and have looked at the Internet, one thing is for certain; you are aghast at how many products there are and wonder which is really best? If this is so, hopefully this will help you to decide.

Depending on your purpose for seeking cement coating products, you will need to mentally set down your goals first. For instance do you wish to find cement coating products that are right for a car dealership, an animal hospital, commercial restrooms, or a laboratory where you will definitely need chemical resistant flooring? Is one of your goals that it absolutely must be anti or non-skid? Must the correct cement coating products that you seek be antibacterial and hygienic? What about urine resistant, antistatic, or UV resistant? Perhaps you are considering only a totally waterproof product?

However, after you resolve all those questions, chances are very good that you will want a product that does not take days before you can use it, and you will probably want a product that is attractive as well as functional, and finally you will want a product that is at the top of its class for being durable. Actually no matter what type of flooring you are seeking when looking at cement coating products, there is only one product that can fulfill all those needs and even more. That is a product called Silikal.

It will never harbor mold or bacteria, and it can withstand any condition as outlined above. It will last a lifetime, yet it can cure in less than one hour, and after it cures, you can even run a car on it, or even a forklift. A Silikal floor is always safe, no matter what lays upon it, and many are shocked to hear that it can even withstand jet fuel on it, thus it’s perfect for industrial garages as well as aircraft hangers.

If you are seeking cement coating products because you are tired of having dust rise from your current cement, your dust worries will definitely be over. Should your existing cement have cracks, holes, ruptures or chips in it currently, the quality licensed applicator of Silikal will take complete care of it, and you will never be bothered by those again. Silikal is a synthetic resin unlike no other. It is made from a secret formula called enhanced MMA, thus do not be swayed by our competitors who only utilize MMA. In addition, our top quality product called Silikal truly goes beyond LEED flooring guidelines therefore you will also receive an environmental stewardship.

Floor Resurfacing Self Leveler: A Step Ahead

A Floor Resurfacing Self Leveler for Seamless Restoration

If you are in the need of floor resurfacing, you will find that you would be better off with the kind that is a floor resurfacing self leveler. As you will see, there are a number of reasons for this.

Due to the many interior designers who love the look, concrete floors are now the flooring of choice for commercial as well as even residential use. The best reasons for this are that since the newer artistic designs have risen, humans have become more conscious of their world, and durable flooring is now considered “green flooring”.

Thus, while remodeling and renovation of the existing building, there often already exists vinyl tiles or “glue on” carpeting that must be removed to install the new concrete flooring. That adhesive that then remains is called cutback adhesive, and unfortunately it is one of the utmost difficult substances to remove from the concrete. Chances are just removal of it could pose serious health concerns since it must be blasted, sanded, or ground off, and that may entail the release of asbestos. Granted that’s what solvents were created for, however solvents smell too much to be utilized in an occupied building, and then there are always the VOCs, or Volatile Organic Compounds. If a building utilizes such solvents that will significantly affect the LEED points.

Thus prior to using floor resurfacing self leveler products the contractor must be sure to remove all loose adhesive. Once thoroughly removed then concrete resurfacing may begin. Of course everyone knows for sure that there is no better concrete product than Silikal.

Now at this point you should understand why a self leveling product is so important. Each of the minute particles of adhesive that was allowed to remain on the substrate must be completely and painstakingly covered, and the Silikal itself must adhere and so thoroughly bond that it will never even have the opportunity to come apart. However as Silikal is totally seamless, completely non porous and won’t ever even harbor a pinhole in it, you can be sure that it will remain in place for as long as your building stands. The reason for this is that Silikal is monolithic through and through, thus when it takes a bite out of your concrete it’s there forever.

With Silikal, you will get a beautiful floor that looks as good years from now as the day it was installed. Just remember that only Silikal uses enhanced MMA to bring beauty with your floor resurfacing self leveler.

Industrial Outdoor Flooring for All Season Protection

Industrial Outdoor Flooring: A Rugged System with Appeal

Those who are in need of industrial outdoor flooring are frequently perplexed by all the offerings out there. Who can blame them, for no matter where you look, you are told that theirs is the best, and if you begin to compare & search industrial outside floors, thankfully one name will definitely stand out as the best, and that is Silikal industrial outdoor flooring.

After all, you are seeking flooring that will be incredibly long lasting known in the trade as durable flooring. Also, you would want your flooring to be totally waterproof, as it is outdoors and will be under the elements. You will also want it to be totally resistant to light, known as UV resistance, so that your industrial outdoor flooring never fades or changes from the original color you chose.

Chances are that it is not only rain and the sun that will try to negatively change your flooring, but in Northern climes, in addition there is the freeze and thaw, as well as snow that often remain on that floor for long periods of time. These harsh elements of nature will need to enter into your decision as to which product you wish to use for any industrial outdoor flooring. While speaking of Northern climes, one must also take into account what salt does to such flooring. With Silikal on your floor you need not worry at all about how it will react to salt. Interestingly enough with industrial use, it is also important to know that no oil, and no grease will have the least effect on that flooring.

Let’s face it too, industrial down time is tremendously costly, and with other products you will have to put up with untimely replacement of your flooring, or in the least having to repair it constantly. This is the best reason yet to utilize Silikal, since it is very budget friendly in the long run.

In addition, Silikal can be installed in the dead of winter. It does not matter what the temperature outdoors is, Silikal can handle it. Silikal’s engineers and scientists have made sure that it can be installed quickly even in below freezing weather.

One of the matters that often arise when speaking of industrial outdoor flooring is how quickly it can be utilized after installation. With Silikal, the answer is that it will be ready for any and all use within a scant hour after being installed due to its high tensile strength.

Cement Coatings Pool Decks: A Poolside Top Coat

Cement Coatings Pool Decks & The Continual Protection They Offer

If you are searching for cement coatings pool decks usage products at the moment, you probably currently own a very lackluster pool decking that has been worn out or is simply too ugly to behold anymore! Chances are that it’s damaged and badly needs a facelift, or you are just now deciding on what kinds of cement coatings pool decks you desire for your new pool. With either need, your very best outside flooring’s come from a company named Silikal.

Without any exaggeration whatsoever, they are the absolute best company when comparing any other cement coatings specifically for cement coatings around a pool deck. Silikal bonds to existing concrete so much better, and its slip resistance is bar none. Aesthetically you will absolutely marvel at its beauty, and the entire performance of your pool deck will substantially improve by using Silikal. That means that people will want to remain on the pool deck longer due to the ambiance, thus if you are a hotel or motel that has an outdoor bar poolside, you will be experiencing many more sales of both food and drinks!

There are some cement coatings pool decks usage that need to be redone every few years, but not with Silikal. You will be positively amazed at how long the useful life of Siikal pool decks is. It is an exceptionally durable surface that is totally UV resistant so that it will never fade or change color on you either.

Your interior decorator can continue to decorate all the way to the pool deck with Silikal too. The decorator will find that it’s available in a myriad of colors so that it can blend in with any of the many decorator colors that might have been chosen indoors for your hotel or motel. After all, your pool deck is going to be visible from inside all the rooms of your lodging, so blending is rather important. A natural stone look is great eye candy for pool deck areas as well. River rock pebble floors keep blend naturally with exterior settings keeping pool areas attractive and while being maintenance free.

If you currently have a wooden deck surrounding your pool area, you know that it requires not only persistent sanding as well as needing to be resurfaced regularly. Thus, you will more than likely understand the costs you will be saving by using Silikal instead of the costs being incurred by your present wood decking.

With Silikal cement coatings pool decks you will not only heighten the attraction you desire to your pool deck, but people will gravitate there and be in a party mood. Just the added income that your pool deck will generate will more than adequately repay itself quickly even without a poolside bar, since you will undoubtedly have more paying guests because of how attractive your pool area has become.